TCL command categories

Command categories include:

TCL administrative commands	Lists and describes the TCL administrative commands.
TCL macros	Lists and describes the TCL macros.
TCL Spooler commands	Lists and describes the TCL spooler related commands.
TCL tape device commands	Lists and describes the TCL tape device related commands.
TCL UNIX commands	Lists and describes the TCL UNIX commands.
TCL Windows-specific commands	Lists and describes the TCL Windows specific commands.

TCL administrative commands

Administrative commands include:

admin utility	Contains systems administration functions and must be invoked from the dm account.
admin.files utility	Used for data backup and restore.
admin.maint utility	Used for creating and maintaining users and accounts.
admin.status utility	Provides information on the users that are logged on to the system as well as reporting the status of the system lock table.
admin.tape utility	Contains options to list the devices as well as commands to set up tape devices for usage.
admin.tape.setup utility	Assigns the various tape devices for use.
:reset-async command	Resets the current port or all ports to default values.
:scroll command	Displays the output of a TCL command in a scrollable (text) window.

TCL macros

TCL macros include:

account-coldstart macro	Performs any account specific coldstart processes and allows users to define their own custom sequence of activities to perform each time the system is powered on or rebooted.
break-key-off macro	Disables the BREAK key on the current port.
break-key-on macro	Enables the BREAK key on the current port.
cal macro	Executes the UNIX cal command.
check-account macro	Performs a dummy save of an account by issuing the save command with the f, d, and i options.
check-files macro	Performs a dummy save of the entire system.
clear-basic-locks macro	Displays and clears all 992 BASIC execution locks.
dm macro	Issues an exec abs command each time a user logs on to the dm account.
exec-stacking-off macro	Disables nested executes to be performed in an atomic manner.
exec-stacking-on macro	Enables nested executes to be performed in an atomic manner.
ldf macro	Lists the summary description (attribute 17) of each attribute-defining item in the specified file.
lerrs macro	Performs a series of reports from the dm,errors, file.
lfd macro	Produces a sorted listing of all file-defining items in the specified file, along with the description attribute from each file pointer.
lfs macro	Contains the AQL sentence which uses the dm,file-of-files file.
lfsb macro	Same as the lfsi macro except that the i-fms column becomes index-fms.
lfsi macro	Same as the lfs macro except that the bytes column becomes i-bytes and the frames column becomes i-fms.
list-abs macro	Produces a report of each D3 mode in the dm,abs, file, showing any modes it calls and those modes which are called.
list-commands macro	Produces a report showing every executable command in the specified master dictionary (md); this includes: Procs, macros, menus, cataloged FlashBASIC programs (BASIC commands) and D3 commands.
list-errors macro	Produces a sorted report of the error messages logged into the dm,errors, file, beginning with the most recently logged message.
list-jobs macro	Produces a report indicating the status of all phantom controlled processes currently in the dm,jobs, file.
list-lists macro	Produces a sorted report of all previously saved lists in the pointer-file file.
list-macros macro	Produces a sorted report of all items defined as macros in the specified account name or your local MD (if md is specified).
list-menus macro	Produces a sorted listing of all items defined as menus in the specified master dictionary.
list-pibs macro	Produces a report of each active port in the dm,pibs, file, showing the port number, the current user of that port and the current terminal/printer characteristics as defined by the term-type command.
list-resizing macro	Lists the status of files currently being resized from the dm,resizing file.
list-runtime-errors macro	Produces a sorted report of error conditions logged into the dm,runtime-errors, file.
list-system-errors macro	Produces a sorted report of error conditions logged into the dm,errors, file.
log-clear-file-off macro	Turns off the logging of the clear-file command.
log-clear-file-on macro	Turns on the logging of the clear-file command.
modem-off macro	Invokes the xonoff command and passes it an f option.
modem-on macro	Invokes the xonoff command and passes it an n option.
net-status macro	Displays statistics on local network usage.
ntlfs macro	Contains the AQL sentence which uses the dm,FileOfFiles file.
shell-variable-off macro	Disables shell variable replacement from TCL.
shell-variable-on macro	Enables shell variable replacement from TCL.
system-coldstart macro	Executes system initialization commands.
user-coldstart macro	Performs the last step of the coldstart process and is the place where users can customize their own sequence of activities to perform each time the system is powered on or rebooted.
user-shutdown macro	Called by the shutdown command as the first procedure in shutting down the machine.
wherebt macro	Invokes the wheres command with the bt parameter.
whered macro	Invokes the wheres command with the db parameter.
whereindx macro	Invokes the wheres command with the indx parameter.
wherelk macro	Invokes the wheres command with the lk parameter.
whereovf macro	Invokes the wheres command with ovf parameter.
wherepu macro	Invokes the wheres command with the pu parameter.
wheresp macro	Invokes the wheres command with the sp parameter.
wheret macro	Invokes the wheres command with the tp parameter.
whobt macro	Invokes the wheres command with the bt parameter.
whod macro	Invokes the wheres command with the db parameter.
whoindx macro	Invokes the wheres command with the indx parameter.
wholk macro	Invokes the wheres command with the lk parameter.
whopu macro	Invokes the wheres command with the pu parameter.
whosp macro	Invokes the wheres command with the sp parameter.
whot macro	Displays the wheres information with the tp parameter.
whovf macro	Invokes the wheres command with the ov parameter.
xcs-off macro	Disables the extended character set function on a specified port, or the current port if omitted.
xcs-on macro	Enables the extended character set function on a specified port, or the current port if omitted.

TCL Spooler commands

Spooler related commands include:

assignfq (UNIX) command	Assigns a printer device driver to a spooler form queue.
assignfq (Windows) command	Assigns a printer device driver to a spooler form queue.
listabs command	Displays the current spooler assignment parameters for each process on the system.
listpeqs command	Displays the status of all spooler controlled print job elements.
listptr command	Displays the printer control block status for all printers.
pr-spool-job command	Respools a spooler hold job.
printronix command	Sets the vertical form length unit (VFU) for Printronix printers only.
shp-kill command	Terminates a D3 printer shared with UNIX and all the associated processes.
shp-status command	Displays status information about printers shared with UNIX, started by the startshp command.
sp-assign command	Displays, changes or resets the current spooler output assignment options for the current process/user.
sp-close command	Closes all current spooler entries previously opened by the current line with an sp-open command or an o option in conjunction with an sp-assign command.
sp-edit command	Accesses existing spooler entries for processing or deletion.
sp-kill command	Stops spooler entry output or removes printers and shared printers.
sp-open command	Leaves the next spooler entry generated by the current process open upon completion of the output generating process.
sp-status command	Displays the status of all spooler-controlled devices.
sp-tapeout command	Retrieves (inputs) reports previously spooled to magnetic media and directs output to the spooler.
startptr command	Activates and initializes up to 2048 printers.
startshp command	Starts a shared printer under UNIX.
startspooler command	Kills all printers associated with the spooler, then initializes the spooler and returns it to normal operation.
stopptr command	Stops the specified printer at the end of the current print job.

TCL tape device commands

Tape device related commands include:

account-restore command	Restores an account from an account-save, file-save, or md-save magnetic media or pseudo tape.
account-save command	Saves individual accounts to the currently attached peripheral storage device.
chg-device command	Changes a tape device.
dev-make command (UNIX)	Adds an entity to the system.
dev-make command (Windows)	Creates devices connected to the VME.
dev-remov command	Removes a specific device from the system.
file-save command	Invokes the procedure to perform a full backup of each file in the D3 file system.
:files command	Restores the entire file system from file-save media.
list-device command	Displays the currently defined devices.
restore-accounts command	Restores all accounts that do not already exist on the system from the attached file-save tape or a tape created by an account-save with an active list of accounts.
s-dump command	Writes items from a given file to the attached peripheral storage device in sorted order.
save command	Invokes the backup procedure to save the entire file system, an individual account, or to perform an incremental save.
sel-restore command	Selectively restores items from either a file-save, account-save, incremental save, or transaction log media to a specific file.
set-8mm command	Sets the 8mm data cartridge as the tape device, by invoking the set-device command and passing in the argument 8mm and an i option.
set-def-tape-blk command	Sets the default block size for a tape device.
set-device command	Attaches the SCT, floppy disk, half-inch, or special devices.
set-floppy command	Attaches the first floppy (in the list-device listing) drive to the current process for subsequent input or output activity.
set-half command	Attaches the 1/2-inch tape drive to the current process for subsequent input or output activity.
set-sct command	Attaches the SCT drive to the current process.
t-act command	Selects a previously attached tape device as the currently active device to read and write to.
t-att command	Attaches the tape unit or floppy disk drive to the current process unit and optionally assigns the block size to the tape I/O buffer.
t-bck command	Backspaces the tape to the end of the previous file or a specified number of blocks.
t-bsf command	Backspaces a given number of files.
t-bsr command	Backspaces a given number of records.
t-cascade command	Cascades or links one tape device to another tape device, either in a chain or a loop.
t-chk command	Checks a tape for parity errors.
t-copy command	Copies data from one device to another.
t-det command	Detaches the tape from the current process, or from another process.
t-dump command	Copies items from a given file to the attached peripheral storage device.
t-fsf command	Forwards a tape a given number of files.
t-fsr command	Forwards a tape a given number of records.
t-fwd command	Moves the attached media forward to the next file, or moves the tape forward a specified number of blocks.
t-link command	Links or cascades one tape device to another tape device, either in a chain or a loop.
t-load command	Restores files from a tape that was generated by t-dump.
t-rdlbl command	Reads the label from the attached magnetic media and initializes the internal label storage area.
t-read command	Reads from the magnetic media unit attached to the current process and displays the contents of each block read to the terminal or printer.
t-rew command	Rewinds the attached media to the beginning, or load point on the tape.
t-select command	Attaches a tape device to the current process, but we recommend using the set-device TCL command.
t-space command	Moves the attached media forward a specified number of files, displaying each tape label as it is encountered.
t-unload command	Rewinds the attached tape.
t-verify command	Validates the integrity of file-save or account-save backups.
t-weof command	Writes an EOF mark at the current position on the attached magnetic media.
t-wtlbl command	Writes a Pick-format (80-byte) tape label at the current position on the attached magnetic media.

TCL UNIX commands

UNIX TCL commands include:

addbi command	Extends the functionality of the D3 monitor by making new C functions available to FlashBASIC.
environ command	Manipulates the UNIX shell environment variables from TCL.
export command	Exports D3 items to UNIX files.
listbi command	Lists the built-in c functions in the item UNIX.builtin, c.builtin (MS-DOS) and user.builtin located in the dm,messages, file.
rmbi command	Removes one or more functions from the list of UNIX or C built-in functions.
unix command	Invokes the sh command, to push a shell, and then automatically returns to D3 on completion.

TCL Windows-specific commands

The commands in this topic are for Windows users only. Windows commands include:

D3Tcl command (Windows) Note: This command is not actually run from TCL.	Connects a remote VME with a TCL command from MS-DOS.
ntlfs macro	Contains the AQL sentence which uses the dm,FileOfFiles file.
%getperfcount() function	Obtains information about loaded C DLLs.
nt_cload command	Loads a C DLL.
nt_cunload command	Unloads a C DLL.
nt_dllinfo command	Obtains information about loaded DLLs.
nt_dllload command	Loads a DLL.
nt_dllunload command	Unloads a DLL.
nt_eventlog command	Displays or clears the Windows application or system event log.
nt_file-info command	Displays file information for a specified file.
nt_getfsiaccount command	Returns the current FSI account getting logged onto.
nt_heapwalk command	Walks the ’heap’ of the given line and display the results in a human readable form.
nt_inv-flash command	Removes a flashed program object in cache and loads the new flash program object.
nt_iotrace command	Captures the i/o activity for a process id.
nt_listclients command	Lists the active clients on the system.
nt_list-jobs command	Lists server jobs running on the server since rebooting.
nt_list-resizing command	Lists the files being resized and the files that have been resized.
nt_makefof command	Creates the entry in the FileOfFiles.
nt_migrateacc command	Migrates an account from the VME to the FSI.
nt_name command	Obtains network information.
nt_osfi_start command	Starts the OSFI server.
nt_osfi_stop command	Stops the OSFI server.
nt_pinfo command	Obtains and displays information about processes (threads).
nt_rel-tcp command	Releases memory and closes tcp.
nt_resize command	Starts the FSI file resizing process.
nt_resize-menu command	Demonstrates the functionality of the four FSI utilities supplied by Rocket.
nt_restart_odbc	Stops or restarts the ODBC server.
nt_telnetdisc command	Inquires/sets/resets the Telnet disconnect feature.
nt_upgrade command	Upgrades any d3 dataset with current changes.
onneterror command	Can be called from the FSI when a network error occurs during FlashBASIC file I/Os. This allows users to break out of the error and customize the subroutine.