- ld command
The ld command presents the best guess of what one wants to see in a columnar listing of any dictionary.
- ldf macro
The ldf macro lists the summary description (attribute 17) of each attribute-defining item in the specified file.
- legend command
The legend is a static statement stored as an item in dm,messages, file. This is in contrast to headings and footings, which are dynamic, changing with each page output.
- lerrs macro
The lerrs macro performs a series of reports from the dm,errors, file.
- lfd macro
The lfd macro produces a sorted listing of all file-defining items in the specified file, along with the description attribute from each file pointer.
- lfs macro
The lfs macro contains the AQL sentence which uses the dm,file-of-files file. Any options from list-file-stats are appended to the macro and included in the sentence. This macro is invoked by the list-file-stats and file-save commands.
- lfsb macro
This macro is the same as the lfsi macro except that the i-fms column becomes index-fms. index-fms is the number of frames in the index only. That is, the number excludes the number of frames used in the file.
- lfsi macro
This macro is the same as the lfs macro except that the bytes column becomes i-bytes and the frames column becomes i-fms. i-bytes is the sum of the number of index frames times the frame size plus the number of bytes in the file (that is, indexes + data). i-fms is the sum of the number of frames in the index plus the number of frames in the file.
- link-pibdev command
The link-pibdev BASIC program creates a logical link between the given (or current) process and the specified port number.
- list-aborts command
The list-aborts command produces a sorted report of the aborts logged into the dm,errors, file, beginning with the most recently logged message. It is different from the list-errors macro in that it only displays aborts not informational messages (such as logoffs or system boots).
- list-abs macro
The list-abs macro produces a report of each D3 mode in the dm,abs, file, showing any modes it calls and those modes which are called.
- list-commands macro
The list-commands macro produces a report showing every executable command in the specified master dictionary (md); this includes: Procs, macros, menus, cataloged FlashBASIC programs (BASIC commands) and D3 commands.
- list-device command
The list-device command shows the currently defined devices.
- list-errors macro
The list-errors macro produces a sorted report of the error messages logged into the dm,errors, file, beginning with the most recently logged message.
- list-file-access command
The list-file-access BASIC program displays file access statistics for the desired files.
- list-file-stats command
The list-file-stats BASIC program produces the file statistics report generated from the most recently executed file-save command or account-save command.
- list-files command
The list-files BASIC program produces a report of all file-defining items(D-pointers) and synonym-defining items (Q-pointers).
- list-index command
The list-index BASIC program lists all indexes for a given file name, account name, or for the system.
- list-item-locks macro
The list-item-locks macro displays a list of item-locks only.
- list-jobs macro
The list-jobs macro produces a report indicating the status of all phantom controlled processes currently in the dm,jobs, file.
- list-lines command
The list-lines BASIC program displays communications protocol information for every port attached to the virtual machine.
- list-lists macro
The list-lists macro produces a sorted report of all previously saved lists in the pointer-file file.
- list-lockq command
The list-lockq command lists the VME processes that are enqueue (waiting) to lock a frame, that is currently locked by some other process.
- list-locks command
The list-locks BASIC program displays the current status of all system, FlashBASIC, spooler, group, and item locks.
- list-logoffs command
The list-logoffs BASIC program produces a report showing the history of logoffs recorded in the dm,errors, file, along with who logged off and the status of the logged off port.
- list-macros macro
The list-macros macro produces a sorted report of all items defined as macros in the specified account name or your local MD (if md is specified).
- list-menu command
The list-menu command produces a documentation quality presentation format of menu(s).
- list-menus macro
The list-menus macros produces a sorted listing of all items defined as menus in the specified master dictionary.
- list-obj command
The list-obj BASIC program outputs descriptive internal information about programs compiled for BASIC and FlashBASIC.
- list-pibs macro
The list-pibs macro produces a report of each active port in the dm,pibs, file, showing the port number, the current user of that port and the current terminal/printer characteristics as defined by the term-type command.
- list-resizing macro
The list-resizing command lists the status of files currently being resized from the dm,resizing file.
- list-restore-errors command
The list-restore-errors BASIC program displays errors recorded during restore.
- list-runaway-limit command
The list-runaway-limit command lists the overflow runaway settings for all pibs. This includes the current runaway limit and whether the set-runaway-autoquit feature is set to on or off.
- list-runtime-errors macro
The list-runtime-errors macro produces a sorted report of error conditions logged into the dm,runtime-errors, file.
- list-system-errors macro
The list-system-errors macro produces a sorted report of error conditions logged into the dm,errors, file.
- list-tandems command
The list-tandems BASIC program lists the devices currently involved in a tandem association.
- list-users command
The list-users BASIC program produces a report of users currently logged on to the system.
- listabs command
The listabs command displays the current spooler assignment parameters for each process on the system.
- listacc command
The listacc BASIC program produces a report of system usage statistics from the dm,acc, file for all accounts, or for a specified account, or for a specific user-ID.
- listbi command
The listbi command lists the built-in c functions in the item UNIX.builtin, c.builtin (MS-DOS) and user.builtin located in the dm,messages, file. These include any built-in c functions that have been added using the addbi command.
- listc command
The listc BASIC program invokes the list-label BASIC program to produce a columnar display of the item-IDs in the specified file, in the order of appearance in the file.
- listconn command
The listconn BASIC program produces a report of all items defined as connectives (also called modifiers) in the specified file reference.
- listdict command
The listdict BASIC program sorts the given file’s dictionary items by attribute count and by item-id then produces a report showing the contents of the various ADIs.
- listfiles command
The listfiles BASIC program produces a report showing all file-defining items and synonym-defining items in an optionally specified file name or account name. The default file name is md.
- listpeqs command
The listpeqs command displays the status of all spooler controlled print job elements. The spooler account holds a file called peqs that is used to reference spooler jobs as normal D3 items and can be listed, sorted, and selected in any sequence.
- listprocs command
The listprocs BASIC program produces a sorted report of all items defined as Procs in the specified file name. The default file name is md when none is specified.
- listptr command
The listptr command displays the printer control block status for all printers.
- listverbs command
The listverbs BASIC program produces a sorted listing of all items defined as command in the specified account name.
- load.mon2 command
The load.mon2 BASIC program displays a graphical map of the duty load of the D3 system, taking a snapshot of the system at a given time interval.
- lock-beep command
The lock-beep command enables/disables beeping on lock failure.
- lock-break command
The lock-break command enables or disables the ability to unconditionally break during a lock failure.
- lock-frame command
The lock-frame command core locks a frame into real memory. This prevents the frame from being flushed to disk for any reason.
- log-clear-file-off macro
The log-clear-file-off macro turns off the logging of the clear-file command.
- log-clear-file-on macro
The log-clear-file-on macro turns on the logging of the clear-file command.
- log-msg command
The log-msg command records the time and date that a particular macro is executed.
- log-status command
The log-status command displays the current status of the transaction logger.
- logoff command
The logoff BASIC program terminates a process on a given port and sends the port to the logon prompt.
- logon command
The logon command logs on a port, other than the one currently being used, onto a specific account.
- logon-lock command
The logon-lock command turns on or off the logon lockout feature.
- logon-reporting command
The logon-reporting command turns on or off the logon reporting feature which logs failed logon attempts to the errors file.
- logon-timeout command
The logon-timeout command updates and displays the global and local logon timeout values. The global timeout value is a default value for the D3 server and the local timeout value is used to override the global value on a specified process. By default, processes are initialized to use the global logon timeout value.
- logto command
The logto command terminates accounting on the current account, and then moves to another specified account. If a password is present, it must be provided. Passwords are case-sensitive.
- loop command
The loop BASIC program performs any TCL command a specific number of times, or continuously, until any key is pressed on the keyboard.