This overview describes all of the topics addressed in this guide, lists the sections to complete for new and upgrade installations, and summarizes the procedures for installing D3.
Complete the sections listed in the following table to upgrade to D3 10.3 if you are upgrading from:
D3 AIX Installation Guide
D3 AIX System Administration Guide
The topics located in the D3 AIX System Administration Guide provide useful information for determining parameter settings and the ideal configuration for D3.
To expedite the D3 installation, follow the guidelines specified in Preparing for installation.
The following steps summarize the procedure for installing D3. For detailed instructions on how to perform each step, see Installing D3. Depending on the type of installation, some steps might not apply.
|1||Loading the D3 package||The installation process transfers the installation files from the distribution media to the system and runs the setup program.|
|2||D3 installation options||You can review and make modifications to the default values in the configuration file generated by the D3 installation script.|
|3||Installing D3 with the selected settings||The D3 package that was loaded in Step 1 and configured in Step 2 is now installed.|
|4||Starting the D3 virtual machine||The virtual machine is started and the ABS and data files are loaded.|
|5||How to proceed||At this time, you are instructed how to proceed to complete the installation or upgrade.|