This section provides information on D3 licensing and how to activate D3 after it is installed on the system.
NOTE |
|
Licensing D3
D3 Product licensing is managed with licensing pools, which enables you to configure a custom system.
An example of licensed pools:
Pool Name |
Max Licenses |
Used Licenses |
Users Allowed |
Weeks |
--------------- |
-------- |
-------- |
------- |
----- |
User |
10 |
2 |
10 |
26 |
Server |
1 |
0 |
1 |
26 |
Connections/IP |
3 |
0 |
3 |
26 |
Phantoms |
12 |
1 |
12 |
26 |
You must complete the steps in Activating D3 for each pool required.
Activating D3 is the last step of the installation process. The product activation procedure is used to activate your system, to increase the number of licensed users on the system, and to use additional D3 features.
To activate D3 execute these steps:
Log on with user-ID dm and master dictionary entry dm.
Enter your user id: dm master dictionary: dm :_ |
As shown above, the colon (:) is a D3 prompt that indicates the user is at the Terminal Control Language (TCL) prompt.
At the D3 TCL prompt, enter:
activate |
Enter q at any time to quit the activation screen.
The copyright information displays, followed by a copyright infringement warning and an agreement clause:
: Do you agree with the above and accept the terms and conditions of the Rocket Software Software License Agreement enclosed with your D3 distribution media. [Yes/No/View/Print/Quit] ? |
Carefully read the information displayed.
To view the entire end-user license agreement, enter view.
To print the entire end-user license agreement to the currently assigned system printer, enter print.
When satisfied with the agreement, enter yes to continue.
If this is a new installation, the system displays:
You do not currently have a System Identification # registered on this system. One is provided to you when you purchase the D3 DBMS. If you have it you may enter it now. If you do not have one or do not enter it now you will only be activated for a TWO week period. Enter System ID or press Q to quit System ID #_ |
Enter the System ID Number provided by Rocket. This number is located on the colored sheet of paper in the D3 package.
The following message displays:
Do one of the following: - To perform a manual activation, press Enter. - To perform an automatic activation, enter the email address registered for the specified system id:xxxxxxxx. Your computer must be connected to the internet to use this option. Email Address: |
NOTE |
These instructions illustrate a manual activation. |
The system displays a similar activation screen:
System Identification 80101431 Magic Number 505031243 232034743 Software Serial Number 00100123 Input the two sets of eight numbers to activate the system, or Q to quit. First _ Second |
Field |
Description |
System Identification |
An 8 digit number, obtained from Rocket as part of purchasing our software. It is located on the colored sheet of paper in the D3 package. |
Magic Number |
An 18 digit number with the last digit a checksum character. It displays on the terminal when the activation program executes. |
Software Serial Number |
A 9 digit number that identifies which copy of software is installed. It displays when the activation program executes. |
Two sets of eight numbers |
These numbers are provided by Rocket during the activation process from either our Web site or from Customer Service over the telephone. |
Make note of these numbers from the activation screen in the space below; Customer Service will ask for them when calling for the activation number.
System Identification __ __ __ __ __ __ __ __ Magic Number __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ Software Serial Number __ __ __ __ __ __ __ __ __ First __ __ __ __ __ __ __ __ Second __ __ __ __ __ __ __ __ To obtain an activation number, Call Rocket at (949)-585-9400. |
Activation numbers are available 24 hours a day, seven days a week. To obtain an activation number, call Rocket Customer Service at (949)-585-9400 or go to the activation page at the Rocket web site:
www3.rocketsoftware.com/rocketd3/support/activation/select_activation.jsp
Enter the two sets of eight-digit numbers provided by Rocket.
If the activation number is not accepted, this message displays:
Error: invalid set of numbers, please try again! |
When the activation number is accepted, a similar screen displays:
Host system: Unix Processor type: 80X86 protected mode Implementation: D3 LINUX System ID: System Options: I/O Subsystem Support Blocked IO SVID termio
Features Status Features Status ------------------------------------------------------------------- OpenDB Available
Max Used Users Pool Name Licenses Licenses Allowed Weeks --------------- -------- -------- ------- ----- User 10 2 10 26 Server 1 0 1 26 Connections/IP 3 0 3 26 Phantoms 12 1 12 26 |
Verify that all appropriate features are available and that the number of licensed users agrees with the license that was purchased.
If not, call Rocket Customer Service to verify the activation.
NOTE |
The activation process shown above must be completed once for each separate licensing pool you are activating. You are prompted to enter the next activation or to exit the process.
|
To verify the system's activations and its set of licensed pools, enter:
maxusers |
The activation process is complete.
See Also
D3 Installation Guide Overview
Upgrading with a File-Save Tape