TN3270/TN3270E and TN5250/TN5250E hosts
If you select TN3270/TN3270E or TN5250/TN5250E, the New Host dialog box changes to the following:
|
1. |
In the Name field, type a descriptive name for the host. This name is used in later configuration steps. It is recommended that you provide
a name that is related to the host itself (e.g.: ProdMF_Montreal). |
|
2. |
In the Telnet section, define the primary host IP address or DNS name and its port (the default is 23). You can also define a secondary
host address and port if you have one. |
|
3. |
In the FTP section, define the host's IP address (or name) with the port number (the default is 21) required to establish an FTP session
with the host. You can also define a secondary host address and port if you have one. |
|
4. |
The TLS/SSL enabled check box allows you to define whether the host uses a secure Telnet communication. The [emulation] servers support SSL/TLS
v3. |
