Power Pads are configured using the Power Pads tab of the View Properties dialog.
To make an exiting Power Pad launch with your BlueZone session:
|
1. |
From the BlueZone menu bar, click and click the Power Pads tab. |
|
2. |
In the Power Pad File Selection section, a list of sample Power Pads appears in the Available Power Pads list on the left. These sample Power Pads mimic the old default Power Keys. The BZMenu Power Pad contains all the default BlueZone Menu Power
Keys. The other sample Power Pads (3270Functions, 5250Functions, etc.) contain all the default Function Power Keys for each
BlueZone emulation client. The names of the sample Power Pads match the emulation client.
|
|
3. |
In the Settings section at the top, ensure that the Show Power Pads check box is selected. This check box must be selected in order for the Power Pads shown in the Active Power Pads list to
be displayed on the desktop. If this check box is not selected, the Power Pads remain in the Active Power Pads list but are
not displayed on the desktop. |
|
4. |
Highlight the desired Power Pads in the Available Power Pads list and click Add. The selected Power Pads are added to the Active Power Pads list on the right. |
|
5. |
Click OK and all active Power Pads launch. If you selected the Enable Docking check box, you are now able to dock one or more of your Power Pads. |
|
6. |
Save and close the BlueZone emulation session. |
The next time you launch this BlueZone session, all the Power Pads that you added to the Active Power Pads list launch at
the same time, and in the positions where they were when you saved the session.