ERR
Processor
Description
[2]
IA
UNEVEN NUMBER OF DELIMITERS (' " \).
[3]
OS
VERB?
[4]
AS
'x' Checksum error; frame = y mode = z abs = a
[5]
IA
THE WORD "x" IS ILLEGAL.
[6]
OS
File name 'x' is illegal.
[7]
IA
A VALUE MUST FOLLOW THE HEADING, FOOTING, TAG OR GRAND-TOTAL CONNECTIVE.
[8]
IA
A WINDOW SPECIFICATION STRING MUST FOLLOW THE "WINDOW" CONNECTIVE.
[9]
OS
SYSTEM DL/ID MISSING.
[10]
OS
FILE NAME MISSING
[11]
AS
FRAME LOCKED AT LOCATION X'x'
[12]
OS
x Power failures have occurred since Cold-start.
[13]
OS
DATA LEVEL DESCRIPTOR (FILE-NAME IN DICTIONARY) IS MISSING.
[14]
TP
Tape input illegal.
[15]
IA
THE FILE-NAME IS PRECEDED BY AN ILLEGAL CONNECTIVE.
[16]
IA
"WITHIN" IS VALID ONLY IN COUNT/LIST/SUM OR STAT STATEMENTS.
[17]
IA
"WITHIN" IS VALID ONLY IN COUNT/LIST/SUM OR STAT STATEMENTS.
[18]
IA
THE LAST WORD MAY NOT BE A CONNECTIVE.
[19]
IA
A VALUE WITHOUT AN ATTRIBUTE NAME IS ILLEGAL.
[20]
IA
ERROR IN THE 'USING' SYNTAX.
[21]
IA
MEANINGLESS ITEM-ID IN STATEMENT
[22]
IA
"TO" BEFORE ITEM-ID VALID ONLY IN A CHANGE STATEMENT
[24]
IA
THE WORD "x" CANNOT BE IDENTIFIED
[25]
IA
THE CONNECTIVE "WITH" MAY NOT IMMEDIATELY PRECEDE A VALUE.
[26]
IA
ATTRIBUTE VALUES MAY NOT BOTH PRECEDE AND FOLLOW AN ATTRIBUTE NAME.
[29]
IA
AT LEAST ONE ITEM-ID MUST BE SPECIFIED FOR A "WITHIN"-TYPE STATEMENT.
[30]
IA
Format error in M/DICT entry defining verb.
[32]
IA
** A required ITEM-ID is missing.
[34]
OS
I AND Z OPTIONS ARE INCOMPATIBLE
[35]
TP
UPDATE FLAGS ARE IN AN INVALID STATE. FULL FILE-SAVE REQUIRED
[42]
IA
- Illegal multiple connectives exist -
[71]
IA
AN ILLEGAL CONNECTIVE MODIFIES THE WORD 'x'
[72]
IA
THE VALUE "x" IS MEANINGLESS.
[79]
IA
THE NUMBER OF SEPARATE AND CLAUSE SETS CANNOT EXCEED 9.
[80]
IA
A SYSTEM ERROR HAS OCCURRED IN MODE: x. THIS MAY BE DUE TO SORT-KEY(S) PRECEDING SELECTION CRITERIA.
[81]
OS
Security code violation.
[82]
OS
YOUR SYSTEM PRIVILEGE LEVEL IS NOT SUFFICIENT FOR THIS STATEMENT.
[86]
OS
File reference attempted on file not previously opened.
[89]
TP
INVALID TAPE BLOCK SIZE
[90]
TP
Tape is not T-DUMP format.
[91]
TP
END TAPE CHECK - x FILE(S)
[92]
TP
END OF RECORDED DATA - x FILE(S)
[93]
TP
ATTACH THE TAPE UNIT.
[94]
TP
END OF FILE
[95]
TP
TAPE ATTACHED TO PROCESS 'x'.
[96]
TP
BOT
[97]
TP
END OF TAPE
[98]
TP
TAPE FUNCTION QUIT!
[99]
TP
BLOCK TRANSFER NOT COMPLETED
[101]
OS
ASYNC device attached.
[111]
OS
ITEM 'x' IS NOT ON FILE
[112]
OS
No entries in trace buffer.
[113]
OS
Format error in trace buffer.
[117]
OS
A DELETE statement must contain either ITEM-IDs or selection criteria.
[118]
IA
The form 'WITH ATTRIBUTE AND ATTRIBUTE' is undefined.
[120]
IA
'x' NEGATIVE BALANCE NOT PERMITTED.
[136]
IA
'x' Does not match the G-CORRELATIVE specs.
[158]
IA
AN ILLEGAL CONNECTIVE OF THE FORM "x" MODIFIES "y".
[163]
IA
AN A-, F-, OR T-CORRELATIVE HAS FAILED COMPILATION
[164]
IA
A D1 or D2 attribute has correlatives that illegally precede the D-CORRELATIVE.
[166]
IA
THE A-CORRELATIVE ATTRIBUTE NAME 'x' IS ILLEGAL.
[167]
IA
MISSING TERMINAL QUOTE ("/') IN A-CORRELATIVE: 'x'.
[168]
IA
ILLEGAL A-CORRELATIVE.: 'x'.
[169]
IA
MISSING LEFT PAREN IN A-CORRELATIVE: 'x'.
[170]
IA
MISSING RIGHT PAREN IN A-CORRELATIVE: 'x'.
[171]
IA
Missing right parenthesis in A-CORRELATIVE.
[172]
IA
Missing right bracket in A-CORRELATIVE.
[173]
IA
MISSING SEMI-COLON IN A-CORRELATIVE.
[175]
TP
end of tape.
[180]
OS
Message not in queue.
[181]
OS
Message 'x' entered in queue.
[183]
SP
End of queue.
[192]
DB
This is an erroneous object string.
[193]
OS
'x' IS A BASIC OBJECT POINTER AND CANNOT BE COPIED
[194]
OS
Don't COPY to the same item in the same file.
[195]
OS
'x' IS NOT A LIST.
[196]
OS
'x' IS TOO LARGE TO BE AN ITEM.
[197]
OS
THERE IS A PROBLEM WITH THE STATEMENT: x
[198]
OS
THE LIST POINTED TO BY POINTER ITEM 'x' IS DEFECTIVE.
[199]
OS
INSUFFICIENT WORK SPACE FOR ITEM 'x'.
[200]
OS
FILE NAME?
[201]
OS
'x' IS NOT A FILE NAME
[202]
OS
'x' NOT ON FILE.
[203]
ED
ITEM NAME?
[204]
OS
FILE DEFINITION 'x' IS MISSING.
[205]
AS
NO STATEMENTS TO BE ASSEMBLED.
[206]
AS
'x' ASSEMBLED.
[207]
AS
UNDEFINED SYMBOLS.
[208]
OS
ERROR IN ITEM-ID LIST
[209]
OS
COLUMNS MUST BE IN RANGE 1-80.
[210]
OS
FILE 'x' IS ACCESS PROTECTED.
[211]
AS
MODE 'x' NO ASSEMBLED CODE CAN BE FOUND.
[212]
AS
MODE 'x' HAS NO FRAME STATEMENT
[213]
AS
MODE 'x' LOCATION COUNTER ERROR AT LINE NO. y.
[214]
AS
MODE 'x' OVERFLOWS FRAME y AT LINE # z
[215]
AS
MODE 'x' HEX ERROR AT LINE NO. y
[216]
AS
MODE 'x' LOADED; FRAME = y SIZE = z CKSUM = a
[217]
AS
MODE 'x' VERIFIED; FRAME = y SIZE = z CKSUM = a
[218]
AS
MODE 'x' FRAME = y HAS z MISMATCHES
[219]
OS
ILLEGAL COMMAND: x
[220]
ED
'x' EXITED
[221]
ED
'x' FILED.
[222]
ED
'x' DELETED.
[223]
ED
'x' exists on file.
[224]
OS
'x' is a pointer item. It may not be loaded into a non-pointer file.
[225]
AS
MODULO MUST BE 37 FOR T-SYM FILE!
[226]
TP
TAPE FORMAT ERROR
[227]
AS
FRAME #x - VERIFIED
[228]
AS
FRAME #x - y MISMATCHES
[229]
OS
'x' IS NOT A VALID ACCOUNT NAME.
[234]
OS
ITEM SIZE EXCEEDS 32,000 BYTES.
[235]
OS
ATTEMPT TO WRITE INTO UPDATE PROTECTED FILE!
[236]
OS
ILLEGAL ATTEMPT TO MODIFY FILE/OBJECT/LIST POINTER!
[237]
AS
MODE 'x' CHECKSUM ERROR AT LINE NO. y
[240]
IA
A "SELECT" OR "SSELECT" MUST BE USED PRECEDING A 'SAVE-LIST' STATEMENT!
[241]
DB
SUCCESSFUL COMPILE! x FRAMES USED.
[242]
DB
'x' DECATALOGED.y
[243]
OS
LIST 'x' SAVED - y FRAMES USED.
[244]
DB
'x' CATALOGED!
[245]
OS
'x' DELETED
[246]
OS
LIST 'x' DECATALOGED
[247]
OS
'x' IS A BASIC OBJECT POINTER AND CANNOT BE EDITED
[260]
BA
INVALID BATCH LOCK COMMAND: x
[265]
PR
PROC STACK OVERFLOW
[266]
PR
THIS VERB CANNOT BE EXECUTED FROM A PROC.
[267]
PR
PROC TRANSFER TO 'x' CANNOT BE COMPLETED.
[268]
PR
THE DESTINATION OF THE PROC "GO" STATEMENT: x, CANNOT BE FOUND
[269]
PR
ROC INPUT BUFFER (MAXIMUM 300 CHARS) EXCEEDED AT STATEMENT: x
[270]
PR
FORMAT ERROR IN THE PROC STATEMENT: x
[272]
BA
A VALUE EXISTS FOR THE ATTRIBUTE REFERENCED BY THE ELEMENT: x
[273]
BA
ERROR IN COLUMN-NUMBER/FIELD-WIDTH OR FORMAT SPECIFICATION AT: x
[274]
BA
UNRECOGNIZABLE BATCH-STRING ELEMENT: x
[275]
BA
Y OR F SUB-ELEMENT ERROR AT BATCH-STRING ELEMENT: x
[276]
BA
D-2 UPDATE WITHOUT D-1 BEING SPECIFIED, AT BATCH-STRING ELEMENT: x
[277]
BA
J ELEMENT MISSING AT BATCH-STRING ELEMENT: x
[278]
BA
ERROR IN PROCESSING SECONDARY BATCH-STRING ELEMENT: x
[279]
BA
INCORRECT SCALING FACTOR IN F* BATCH-STRING ELEMENT: x
[280]
BA
FILE-DEFINITION BATCH ELEMENT ERROR AT: x
[281]
BA
D1 MUST HAVE Y11 STORAGE CORRELATIVE ... ERROR AT: x
[282]
IA
INVALID PARAMETER FOR SELECT LIST
[288]
PR
Cursor control in PROC statement: x specifies col#/row# greater than TERM setting.
[290]
OS
THE RANGE OF THE PARAMETER "x" IS NOT ACCEPTABLE.
[291]
OS
'x' FILE-DEFINITION IS MISSING.
[298]
DB
FORMAT ERROR IN SPECIFICATIONS.
[316]
OS
NUMERIC PARAMETER MISSING
[318]
OS
Count too high.
[330]
OS
Illegal line number.
[331]
OS
THE ACCOUNT FILE IS MISSING.
[334]
OS
Requested number of additional work-space frames, x, is not available; additional work-space has not been assigned.
[335]
OS
[336]
OS
[ ] Logged off at hh:mm:ss on dd/mm/yy [ ]
[337]
OS
USER IS NOT LOGGED ON.
[338]
OS
ACCOUNT FILE STATISTICS WERE NOT UPDATED DUE TO EITHER:
INSUFFICIENT WORK-SPACE TO CONTAIN THE ACCOUNT FILE ITEM, OR
SYSTEM DICTIONARY CHANGED WHILE YOU WERE LOGGED ON.
[339]
IA
Improper or undefined format for date conversion.
[340]
OS
[ ] Connect time= x mins.; CPU= y units; LPTR pages= z ..[ ]
[341]
OS
OPERATING SYSTEM SOFTWARE VERIFIED.
[342]
OS
*** THE SYSTEM SOFTWARE DOES NOT VERIFY!
***THERE ARE x FRAMES WITH MISMATCHES
[346]
OS
AUTOBOOT Enabled
[347]
OS
AUTOBOOT Disabled
[350]
OS
NO 'ITEM LOCKS' EXIST!
[360]
OS
hh:mm:ss -- CAPTURE SESSION STARTED!
[361]
OS
Maximum number of CAPTURE session reached for this PROCESS!
[362]
OS
NO CAPTURE SESSIONS EXIST!
[363]
OS
hh:mm:ss-- CAPTURE SESSION 'x' TERMINATED!
[364]
OS
The specified CAPTURE SESSION is already started!
[365]
OS
CAPTURE mode already STOPPED!
[366]
OS
hh:mm:ss -- CAPTURE SESSION temporarily STOPPED!
[367]
OS
hh:mm:ss -- CAPTURE SESSION RESUMING!
[368]
OS
CAPTURE mode was not STOPPED!
[369]
OS
CAPTURE SESSION 'x' NOT FOUND!
[370]
OS
hh:mm:ss -- CAPTURE SESSION started for PROCESS 'x'.
[375]
OS
FILE BASE 'x' is not defined in the LOCK-XREF file. See BUILD-LOCK-XREF documentation.
[376]
OS
UPDATE LOGGING enabled for FILE BASE 'x'
[377]
OS
UPDATE LOGGING disabled for FILE BASE 'x'
[378]
OS
TRANSACTION RESTORE 'TERMINATED'.
[379]
OS
Transaction process not suspended.
[381]
OS
There is no TRANSACTION PROCESSOR active!
[382]
OS
Transaction Processor -- DEACTIVATED!
[383]
OS
Transaction Processor -- SUSPENDED!
[384]
OS
Process 'x' is already designated as the TRANSACTION PROCESSOR!
[385]
OS
'NO' TRANSACTIONS IN QUEUE
[386]
OS
'ONE' TRANSACTION IN QUEUE
[387]
OS
'x' TRANSACTIONS IN QUEUE
[388]
OS
Transaction process could not attach the tape.
[390]
TP
'x' LOADED.
[391]
OS
'x' VERIFIED.
[392]
OS
Transaction process resumed.
[393]
OS
Not a Transaction Tape
[398]
IA
THE FILE OR DL/ID REQUIRES A V(ERTICAL) CORRELATIVE FOR THIS STATEMENT.
[399]
IA
THE MAXIMUM OF 20 LEVELS FOR A "WITHIN"-TYPE STATEMENT HAS BEEN EXCEEDED.
[401]
OS
NO ITEMS PRESENT.
[402]
OS
FILE DEFINITION ITEM 'x' NOT OVERWRITTEN
[403]
OS
END OF LIST
[404]
IA
x ITEMS SELECTED.
[405]
IA
x ITEMS LISTED.
[407]
IA
x ITEMS COUNTED
[408]
IA
ONE ITEM COUNTED.
[409]
IA
'x' IS NOT ON FILE.
[410]
OS
A SYNONYM (Q-TYPE) FILE CANNOT BE SPECIFIED IN THIS STATEMENT.
[411]
OS
'DICT' OR 'DATA' MUST BE SPECIFIED IN A CLEAR-FILE STATEMENT.
[412]
OS
INSUFFICIENT DISK SPACE AVAILABLE FOR THE FILE.
[413]
OS
THE FILE NAME ALREADY EXISTS IN THE MASTER DICTIONARY.
[414]
OS
ILLEGAL OR MISSING MODIFIER USED IN DEFINING THE FILE AREA(S).
[415]
OS
'x' exists on file.
[416]
OS
RANGE ERROR IN MODULO PARAMETER.
[417]
OS
FILE 'x' CREATED; BASE = y, MODULO = z.
[418]
OS
FILE DEFINITION ITEM 'x' NOT COPIED
[419]
OS
THE SPECIFIED FILE CANNOT BE CLEARED OR DELETED!
[420]
OS
DICTIONARY FILE DELETION CANNOT BE DONE WITHOUT DELETION OF DATA-SECTION(S) FIRST.
[425]
OS
INVALID FRAME-ID REQUEST
[426]
OS
DATA FILE ALREADY EXISTS!
[427]
OS
THERE IS NO DATA SECTION FOR THIS FILE.
[428]
DB
'x' OBJECT POINTER NOT FOUND
[429]
DB
'x' PROGRAM OBJECT VERIFIES; VERSION y
[430]
DB
'x' PROGRAM OBJECT DOES NOT VERIFY
[431]
OS
UNABLE TO COPY OUT OF A POINTER FILE!
[432]
DB
'x' ITEM-NAME USED IN PROGRAM-FILE DICTIONARY, COMPILE ABORTED.
[521]
OS
TOO MANY CHARACTERS IN WORD TO BLOCK
[522]
OS
BLOCK-CONVERT FILE MISSING OR IMPROPERLY DEFINED
[523]
OS
BLOCK OUTPUT WOULD EXCEED PAGE WIDTH
[524]
OS
Input character 'x' is not in the BLOCK-CONVERT file.
[525]
OS
INPUT CHARACTER 'x' IS IMPROPERLY FORMATTED IN BLOCK CONVERT FILE
[530]
OS
ALREADY LOGGED ON
[531]
OS
PROCESS ROADBLOCKED
[532]
OS
ILLEGAL USER ID
[533]
OS
LOGON SUCCESSFUL
[534]
OS
LOGOFF SUCCESSFUL
[535]
OS
ILLEGAL PROCESS NUMBER.
[536]
OS
ILLEGAL PROCESS NUMBER.
[550]
OS
A REQUIRED NUMERIC PARAMETER IS MISSING OR INVALID
[551]
SP
SPECIFY NUMBER OF LINES TO SKIP
[552]
OS
ITEM 'x' HAS INVALID FORMAT
[553]
DB
PROGRAM NOT FOUND
[554]
OS
DATE FORMAT SET TO INTERNATIONAL STANDARD (DD/MM/YY) ON SYSTEM-WIDE BASIS.
[555]
OS
DATE FORMAT SET TO UNITED STATES STANDARD (MM/DD/YY) ON SYSTEM-WIDE BASIS
[556]
TP
ITEM SHORTER THAN TAPE BUFFER - DDUMP ABORTED!
[570]
OS
THIS VERB CANNOT BE USED UNLESS SYSTEM IS BOOTED WITH NX OR NF OPTION. NO ACTION TAKEN.
[571]
OS
INSUFFICIENT SPACE IN OVERFLOW TABLE, NO ACTION TAKEN.
[599]
DB
Object code in 'x' is in incorrect format.
[604]
PR
'x' is an undefined label reference.
[630]
SP
'STOP' IN EFFECT. USE 'RESUME'!
[631]
SP
SPOOLER IS WAITING FOR PRINTER CABLE TO BE ATTACHED!
[632]
SP
SPOOLER IS WAITING BECAUSE THE PRINTER IS OFF-LINE!
[633]
SP
SPOOLER IS WAITING FOR THE TAPE TO BE DETACHED!
[634]
SP
SPOOLER IS WAITING FOR THE PRINTER TO BE DETACHED!
[635]
SP
SPOOLER IS WAITING BECAUSE THE TAPE IS OFF-LINE!
[636]
TP
THERE WAS A PARITY ERROR ON WRITING A SPOOLED FILE!
[637]
SP
THE SPOOLER NEEDS THE NEXT REEL OF TAPE TO CONTINUE!
[638]
SP
THE SPOOLER IS WRITING A FILE ON TAPE.
[639]
SP
The spooler is outputting a file to its console.
[640]
SP
THE SPOOLER IS PRINTING A FILE ON THE PRINTER.
[641]
SP
HOLD FILE #x ADDED;
[644]
SP
AN OPEN FILE FOR LINE #x IS BEING PROCESSED.
[645]
SP
A CLOSED FILE FOR PROCESS #x IS BEING PROCESSED.
[646]
SP
THE CURRENT JOB HAS BEEN ABORTED
[651]
SP
SPOOLER IS NOT ACTIVE
[652]
SP
TOO MANY PAGES!
[653]
SP
NO FILE BEING OUTPUT OR FILE ORIGINATED ON ANOTHER PROCESS!
[654]
IA
ILLEGAL OUTPUT STRING LENGTH!
[655]
OS
NOT ATTACHED!
[656]
SP
END OF SPOOL QUEUE.
[657]
SP
NOT A HOLD FILE
[658]
SP
ILLEGAL NUMBER! USE SP-STATUS.
[659]
SP
LINE PRINTER READY.
[660]
SP
INSUFFICIENT PRIVILEGES; OR DEVICE IS ATTACHED TO A SPOOLER!
[661]
SP
Tapeout terminated because of ASSIGN T.
[700]
IA
RUN-TIME F-CORRELATIVE ABORT.
[701]
IA
INVALID FUNCTION CORRELATIVE DEFINITION : x
[703]
IA
Invalid C-conversion/correlative definition : x
[704]
IA
Invalid P-Conversion definition : x
[705]
IA
ILLEGAL CONVERSION CODE : 'x'
[706]
IA
THE TRANSLATE CONVERSION-CODE : x IS ILLEGAL.
[708]
OS
'x' CANNOT BE CONVERTED.
[709]
IA
Conflict in T-conv definition; requests verify but there is a null AMC.
[710]
IA
Invalid L- or R-conversion definition : x
[712]
IA
Value test impossible on attribute with F-conversion: x
[780]
OS
ITEM 'x' NOT ON FILE.
[781]
OS
'x' ADDED
[782]
OS
'x' UPDATED
[783]
ED
'x' DELETED
[800]
OS
< x > items dumped.
[802]
TP
x ITEMS DUMPED.
[803]
TP
x ITEMS DUMPED.
[805]
OS
x ITEMS COPIED
[806]
OS
ITEMS UPDATED.
[860]
OS
Check code error.
[930]
OS
REDUCING RESTORE PERFORMED BEGINNING .AT FILE #x. SECOND PASS STARTING AT THIS FILE REQUIRED!
[931]
OS
INCR-RESTORE STOPPED AT FILE # x.
[932]
OS
CANNOT SKIP REQUIRED FILE # x.
[949]
AS
Illegal frame-ID in primary space! program terminated.
[950]
OS
LINKFIELD ERROR - GROUP AT x - FRAME y. LINKS: z a b c
[951]
OS
ILLEGAL FORWARD LINK. GROUP AT x FRAME y. LINKS z a b c
[952]
OS
ILLEGAL BACKWARD LINK. GROUP AT x FRAME y. LINKS z a b c
[953]
OS
SHOULD LINK BACK TO: GROUP AT x FRAME y. LINKS z a b c
[954]
AS
x NEW ERROR ITEMS CREATED IN DICT TSYM
[990]
OS
ERROR IN ABS-DUMP FRAME LIMITS SPECIFICATIONS.
[991]
OS
M/DICT entry missing, or required specification(s) .missing.
[992]
TP
x ITEM(S) HAVE BEEN RESTORED
[993]
OS
ACCOUNT NAME MUST BE SPECIFIED.
[994]
OS
MODULO OF SYSTEM DICTIONARY CHANGED. USE FULL FILE RESTORE!
[1004]
OS
'x' NOT ON FILE
[1006]
OS
Item 'x' exists on file.
[1011]
IA
TRULY BIZARRE ERROR IN THE SELECTION PROCESSOR. TRY TO GENERATE A REPRODUCIBLE CASE. CALL YOUR SYSTEM SOFTWARE SUPPORT GROUP.
[1050]
DB
THAT IS AN OBSOLETE BASIC VERB (RUN OR CATALOG). PLEASE OBTAIN THE CURRENT DEFINITION.
[1051]
DB
THAT IS A PROGRAM CATALOGED UNDER PRE-R80 PROTOCOLS. PLEASE RECATALOG THE PROGRAM.
[1099]
SP
HOLD ENTRY #
[1101]
SP
NULL PRINTER NUMBER.
[1102]
SP
PRINTER NUMBER TOO BIG.
[1104]
OS
ILLEGAL CHARACTER.
[1105]
SP
PRINTER MUST BE STOPPED.
[1106]
SP
FORM NUMBER TOO BIG -- EXCEEDS 125.
[1107]
SP
TOO MANY PAGES IN THE PAGE SKIP --EXCEEDS 9.
[1109]
SP
TOO MANY PRINT FILES.
[1110]
SP
ILLEGAL PRINTER TYPE -- NOT P OR S.
[1111]
SP
ILLEGAL PROCESS NUMBER OR PARALLEL PRINTER NUMBER.
[1112]
SP
ILLEGAL PARALLEL PRINTER NUMBER.
[1113]
SP
ILLEGAL SERIAL PRINTER NUMBER.
[1114]
SP
THE DEVICE OR PROCESS WHICH YOU SPECIFIED IS BEING USED AS ANOTHER PRINTER ON THE SYSTEM.
[1115]
SP
ALLOCATION ATTEMPTED ON UNINITIALIZED PRINTER.
[1116]
SP
THERE IS NO JOB ENQUEUED FOR OUTPUT ON THE FORMS YOU SPECIFIED. THEREFORE, ALIGNMENT IS IMPOSSIBLE.
[1117]
SP
YOUR ALIGN WAS JUST ABORTED BY SOMEONE. YOU MUST START THE ALIGN PROCESS OVER.
[1118]
SP
THE PRINTER CONTROL BLOCK HAS BEEN INITIALIZED. HOPEFULLY, THE CORRECT PAPER IS IN THE PRINTER, AND THE CORRECT LPI IS SET.
[1119]
SP
YOU ARE ATTEMPTING TO START PRINTER x ON PROCESS y, WHICH IS NOT STOPPED.
[1121]
OS
YOU ARE IMPROPERLY LOGGED ON.
[1122]
SP
YOUR OUTPUT SPECIFICATION IS NO OUTPUT. REASSIGN YOUR PROCESS IF YOU WISH TO OUTPUT A HOLDFILE.
[1123]
OS
PROCESS # x IS ALREADY LOGGED ON.
[1126]
SP
PRINTER #x CONTROL BLOCK HAMMERED. CLEARED TO NULL.
[1127]
SP
ILLEGAL PRINTER NUMBER. MUST BE 0-7.
[1129]
OS
x FORM Q ELEMENTS UNLINKED.
[1132]
OS
x QUEUE ELEMENTS.
[1133]
AS
x FRAMES IN USE.
[1140]
SP
YOUR OPEN FILES WERE CLOSED
[1143]
SP
ALIGN TERMINATED; PRINTER STOPPED.
[1144]
TP
THE TAPE IS NOT AVAILABLE FOR USE JUST NOW.
[1145]
OS
ILLEGAL SPECIFICATION NUMBER x.
[1147]
OS
NOT ATTACHED!
[1148]
SP
TAPEOUT TERMINATED BECAUSE OF ASSIGN T OR NULL ASSIGNMENT.
[1150]
OS
THERE IS SOMETHING WRONG WITH THE SYNTAX OF YOUR VERB'S OPTIONS.
[1151]
SP
ENTRY # x
[1152]
TP
TAPE Device currently in use
[1160]
SP
YOUR OUTPUT SPECIFICATION IS NO OUTPUT. REASSIGN YOUR PROCESS IF YOU WISH TO OUTPUT A HOLDFILE.
[1161]
SP
END OF REQUESTED PRINT FILES.
[1162]
SP
END OF PRINT FILE CONTROL BLOCK.
[1169]
SP
ILLEGAL PRINTER NUMBER. MUST BE BETWEEN 0 AND 7 INCLUSIVE.
[1170]
SP
PRINTER #x SET TO STOP
[1173]
SP
PRINTER #x CONTROL BLOCK HAMMERED. CLEARED TO NULL.
[1175]
SP
PARALLEL PRINTER #x HAS BEEN DELETED.
[1176]
SP
SERIAL PRINTER #x HAS BEEN DELETED, AND ITS PROCESS SENT TO LOGON.
[1177]
SP
PRINTER #x IS INACTIVE.
[1178]
SP
THE JOB BEING OUTPUT ON PRINTER #x IS NOT YOUR PRINT FILE.
[1179]
SP
JOB ABORTED ON PRINTER #x
[1180]
SP
PRINT FILE #x WAS NOT UNLINKED BECAUSE IT IS BEING OUTPUT.
[1181]
SP
PRINT FILE #x WAS NOT UNLINKED BECAUSE IT IS UNUSED.
[1182]
SP
PRINT FILE #x WAS NOT UNLINKED BECAUSE IT IS NOT SPOOLED.
[1183]
SP
PRINT FILE #x WAS NOT CREATED ON THE ACCOUNT ONTO WHICH YOU ARE NOW LOGGED.
[1184]
SP
PRINT FILE #x WAS UNLINKED AND IS AVAILABLE AS A HOLD FILE.
[1981]
IA
A ITEMS COLUMNIZED.
[2321]
OS
Item 'x' error.
[4400]
OS
No TRACE allocated, turn TRACE on.
[4401]
OS
Not enough memory to allocate TRACE tables.
[4402]
OS
TRACE is ON.
[4403]
OS
TRACE is OFF.
[5001]
DB
RANGE ERROR IN 'X' PARAMETER OF @(X,Y) EXPRESSION: x. MUST BE ZERO THRU PAGE WIDTH.
[5002]
IA
RANGE ERROR IN 'Y' OR 'Z' PARAMETER OF @(X,Y,Z) EXPRESSION: x. MUST BE ONE THRU PAGE LENGTH.
[5003]
OS
BACKGROUND ITEM 'x' IS NOT ON FILE.
[5004]
OS
FORMAT ERROR IN @(X,Y) EXPRESSION: x. MAY BE DUE TO MISSING ')' OR EMBEDDED BLANKS.
[5005]
IA
MISSING COLON, DELIMITER OR EMBEDDED BLANK IN EXPRESSION: x
[5006]
IA
DICTIONARY ITEM 'x' MISSING OR INVALID.
[5007]
OS
FORMAT ERROR IN SUBSTRING EXPRESSION: x MUST BE [1.N].
[6000]
TP
END OF RECORDED DATA
[6001]
TP
INVALID VERB FOR THIS TAPE UNIT
[6002]
TP
INVALID TAPE COMMAND
[6003]
TP
BLOCK SIZE OUT OF RANGE
[6004]
TP
TAPE ON LINE
[6005]
TP
INVALID TAPE UNIT SELECTED
[6006]
TP
1/2 INCH TAPE UNIT
[6007]
TP
1/4 INCH CARTRIDGE UNIT
[6008]
TP
TAPE UNIT NOT ASSIGNED
[6011]
TP
TAPE TYPES DIFFER IN CHAIN
[6012]
TP
DUPLICATE TAPE UNIT IN CHAIN
[6013]
TP
INVALID TAPE FORMAT SPECIFIED
[6014]
TP
TAPE FORMAT SET TO QIC11.
[6015]
TP
TAPE FORMAT SET TO QIC24.
[6016]
TP
TAPE DRIVE ALREADY ASSIGNED
[6017]
TP
ILLEGAL TAPE DRIVE
[6018]
TP
TAPE UNIT ATTACHED
[6019]
TP
QUARTER INCH TAPE, QIC 11 FORMAT
[6020]
TP
QUARTER INCH TAPE, QIC 24 FORMAT
[6021]
TP
HALF INCH TAPE, CACHE OFF
[6022]
TP
HALF INCH TAPE, CACHE ON
[6023]
TP
TAPE FORMAT SET, CACHE ON
[6024]
TP
TAPE FORMAT SET, CACHE OFF
[6025]
TP
TAPE FORMATS DIFFER IN CHAIN
[6037]
TP
FLOPPY DISK UNIT
[6038]
TP
CD-ROM UNIT
[6039]
TP
DIGITAL AUDIO TAPE UNIT
[6040]
TP
1/2" HIGH-DENSITY
[6041]
TP
1/2" LOW-DENSITY
[6043]
TP
TAPE CHAINING IS NOT SUPPORTED ON THIS TAPE DEVICE
[6044]
TP
FLOPPY RAW MODE ON
[6045]
TP
FLOPPY RAW MODE OFF
[6046]
TP
FLOPPY DISK UNIT, RAW ON
[6047]
TP
FLOPPY DISK UNIT, RAW OFF
[6048]
TP
FLOPPY FORMAT SELECTION MENU
[6049]
TP
TO COPY TO FLOPPY THE SOURCE TAPE BLOCK SIZE MUST BE 500 - COPY ABORTED!
[6050]
TP
200MB TAPE UNIT
[6051]
TP
8MM EXB-8500 FORMAT
[6052]
TP
8MM EXB-8200 FORMAT
[6053]
TP
8MM FORMAT SELECTION MENU
[6055]
TP
SHORT LABEL NOT SUPPORTED ON THIS UNIT
[6056]
TP
UNABLE TO READ/WRITE THIS MEDIUM. IF NEEDED FORMAT AND RETRY.
[6057]
TP
QUARTER-INCH FORMAT SELECTION MENU
[6060]
TP
TAPE FORMAT SET TO QIC 120
[6061]
TP
TAPE FORMAT SET TO QIC 150
[6062]
TP
QUARTER INCH TAPE, QIC 120 FORMAT
[6063]
TP
QUARTER INCH TAPE, QIC 120 FORMAT
[6064]
TP
QUARTER INCH TAPE, QIC 150 FORMAT
[7000]
OS
CANNOT WARMSTOP SYSTEM WITHOUT BATTERY BACKUP
[8001]
IA
Format of FIND verb is: FIND filename "string"
[8010]
OS
LINE x LINKED TO PROCESS y.
[8011]
OS
LINE IN USE.
[8012]
OS
LINE x UNLINKED.
[8013]
OS
LINE x ATTACHED.
[8014]
OS
LINE x NOT ATTACHED.
[8015]
OS
ILLEGAL LINE NUMBER
[8050]
IA
MAXIMUM MODULO ALLOWED IS 8000
[8100]
OS
Save complete (A Files, B Items.)
[8101]
OS
Specified file name must be dictionary level file.
[8102]
OS
Updates may not be saved on a partial file-save tape.
[8103]
OS
Update-only save is not backward compatible.
[8104]
OS
Complete file-save must be done prior to an update-only save.
[8105]
OS
Dict or Data level save are not backward compatible.
[8106]
OS
The file-save process may only be run by one user at a time.
[8107]
OS
The L option may not be used when multiple files are specified or a select list is active.
[8108]
OS
"All Items" is not valid. Only file definition items (D pointers) may be specified.
[8109]
OS
The N and L options cannot both be used with the SAVE verb.
[8120]
OS
Restore complete (A Files, B Items.)
[8121]
OS
The parent file (as specified in the input statement) must be a dictionary level file (dict, account, or SYSTEM).
[8122]
OS
All users must log off before restoring the system!
[8123]
OS
The level of the save tape too high for the specified destination file. This may occur when attempting to restore an account from a tape which contains only dictionary and/or data, or when attempting to restore a dictionary from a tape which contains only data level files.
[8124]
OS
Account name must be specified.
[8125]
OS
Dictionary name must be specified.
[8126]
OS
Tape verified.
[8127]
OS
Tape has A errors.
[8128]
OS
File not found.
[8129]
OS
The specified data frame size must be a multiple of 500.
[8130]
OS
(L) option illegal when update logging off or parent file tape is 'DU' (ULOG-SKIP).
[8150]
OS
File definition items may only be copied to dictionaries at the same level as the source dictionary.
[8151]
OS
Source and destination files must be dictionaries for COPY-FILE.
[8153]
OS
Basic subroutine 'A' may not use B:... format when not first conversion in line.
[8154]
OS
Basic subroutine 'A' is not on file.
[8155]
OS
'A' is not a compatible item.
[9009]
PR
PQ-SELECT register out of range 1 - 5.
[9012]
OS
Update attempted on an input file at statement: x
[9020]
DB
compilation aborted.
[9021]
PR
PROC format error in label
[9022]
PR
Duplicate label found.
[9025]
PR
Format error in 'GO' statement.
[9030]
IA
Error in PHRASE USAGE:
[9218]
OS
MAXUSERS set to: x
[9219]
IA
Unrecognizable TCL OBJECT TYPE detected by INFO/ACCESS preprocessor - x
[9220]
IA
The 'USING' connective is ambiguous (and illegal) within a PHRASE!
[9221]
IA
CIRCULAR PHRASE detected (Maximum nesting level of 50 reached!)
[B0]
DB
x CATALOGED!
[B1]
DB
RUN-TIME ABORT AT LINE x
[B9]
DB
WRITE, DELETE, or CLEARFILE operation attempted on read only file.
[B10]
DB
LINE x VARIABLE HAS NOT BEEN ASSIGNED A VALUE; ZERO USED!
[B11]
DB
LINE x TAPE RECORD TRUNCATED TO TAPE RECORD LENGTH!
[B12]
DB
LINE x FILE HAS NOT BEEN OPENED
[B13]
DB
LINE x NULL CONVERSION CODE IS ILLEGAL; NO CONVERSION DONE!
[B14]
DB
LINE x BAD STACK DESCRIPTOR
[B15]
DB
LINE x ILLEGAL OPCODE: y
[B16]
DB
LINE x NON-NUMERIC DATA WHEN NUMERIC REQUIRED; ZERO USED!
[B17]
DB
LINE x ARRAY SUBSCRIPT OUT-OF-RANGE
[B18]
DB
LINE x ATTRIBUTE NUMBER LESS THAN -1 IS ILLEGAL.
[B19]
DB
LINE x ILLEGAL PATTERN
[B20]
DB
LINE x COL1 OR COL2 USED PRIOR TO EXECUTING A FIELD STMT; ZERO USED!
[B21]
DB
LINE x MATREAD: NUMBER OF ATTRIBUTES EXCEEDS VECTOR SIZE
[B22]
DB
Branch index of x is illegal; branch taken to first statement-label!
[B23]
DB
Branch index of x exceeds number of statement-labels; branch taken to last statement-label!
[B24]
DB
LINE x DIVIDE BY ZERO ILLEGAL; ZERO USED!
[B25]
DB
PROGRAM 'x' HAS NOT BEEN CATALOGED
[B26]
DB
LINE x 'UNLOCK C' ATTEMPTED BEFORE LOCK!
[B27]
DB
LINE x RETURN EXECUTED WITH NO GOSUB
[B28]
DB
LINE x NOT ENOUGH WORK SPACE
[B29]
DB
CALLING PROGRAM MUST BE CATALOGED
[B30]
DB
LINE x ARRAY SIZE MISMATCH
[B31]
DB
LINE x STACK OVERFLOW
[B32]
DB
LINE x PAGE HEADING EXCEEDS MAXIMUM OF 1400 CHARACTERS
[B33]
DB
LINE x PRECISION DECLARED IN SUBPROGRAM 'C' IS DIFFERENT FROM THAT DECLARED IN THE MAINLINE PROGRAM
[B34]
DB
LINE x FILE VARIABLE USED WHERE STRING EXPRESSION EXPECTED
[B35]
DB
'M/DICT' invalid object of 'CLEARFILE'; ignored!
[B36]
DB
SYSTEM DICT illegal object of 'CLEARFILE'; abort!
[B37]
DB
Excessive number of parameters passed to external subroutine; abort!
[B38]
DB
MATWRITE increased the number of attributes.
[B39]
DB
Division overflow; result in doubt!
[B41]
DB
LINE x LOCK NUMBER IS GREATER THAN 255.
[B48]
DB
Line A string exceeds 32739 bytes.
[B49]
DB
Line A string exceeds 16,777,214 bytes.
[B50]
DB
Function with argument value <= 0 undefined; zero returned!
[B51]
DB
Negative value raised to non-integer value. zero returned.
[B52]
DB
String length greater than 32760. Truncated!
[B55]
DB
MAT READ/WRITE operation must be to/from a vector.
[B56]
DB
'x' invalid command to 'U60E0' user exit. Ignored!
[B57]
DB
x is out of range for obsize set. Ignored!
[B60]
DB
PROCWRITE attempted outside of PROC mode.
[B97]
DB
VERSION NUMBER OF COMPILED PROGRAM 'x' IS DIFFERENT FROM THAT OF OPERATING SYSTEM.
[B98]
DB
Garbage collection/buffer utilization report
Number of times garbage collected: x
Total number of bytes buffer used: y
Total number of bytes abandoned: z
** Buffer usage **
Buffers/size: 50 bytes 150 bytes 250 bytes*
used a b c
reused d e f
abandoned g
*--or multiples thereof.
[B99]
DB
You must execute the UPDATE-ACCOUNT PROC in SYSPROG to update your account to DATA/BASIC modification level 1
[B100]
DB
LINE x COMPILATION ABORTED; NO OBJECT CODE PRODUCED.
[B101]
DB
LINE x MISSING "END", "NEXT", "WHILE", "UNTIL", "REPEAT" OR "ELSE"; COMPILATION ABORTED, NO OBJECT CODE PRODUCED.
[B102]
DB
LINE x BAD STATEMENT
[B103]
DB
LINE x LABEL 'C' IS MISSING
[B104]
DB
LINE x LABEL 'C' IS DOUBLY DEFINED
[B105]
DB
LINE x 'C' HAS NOT BEEN DIMENSIONED
[B106]
DB
LINE x 'C' HAS BEEN DIMENSIONED AND USED WITHOUT SUBSCRIPTS
[B107]
DB
LINE x "ELSE" CLAUSE MISSING
[B108]
DB
LINE x "NEXT" STATEMENT MISSING
[B109]
DB
LINE x VARIABLE MISSING IN "NEXT" STATEMENT
[B110]
DB
LINE A 'END' STATEMENT MISSING
[B111]
DB
LINE x "UNTIL" OR "WHILE" MISSING IN "LOOP" STATEMENT
[B112]
DB
LINE x "REPEAT" MISSING IN "LOOP" STATEMENT
[B113]
DB
LINE x TERMINATOR MISSING
[B114]
DB
LINE x MAXIMUM NUMBER OF VARIABLES EXCEEDED
[B115]
DB
LINE x LABEL 'C' IS USED BEFORE THE EQUATE STMT
[B116]
DB
LINE x LABEL 'C' IS USED BEFORE THE COMMON STMT
[B117]
DB
LINE x LABEL 'C' IS MISSING A SUBSCRIPT LIST
[B118]
DB
LINE x LABEL 'C' IS THE OBJECT OF AN EQUATE STMT AND IS MISSING.
[B119]
DB
LINE x WARNING - PRECISION VALUE OUT OF RANGE - IGNORED!
[B120]
DB
LINE x WARNING - MULTIPLE PRECISION STATEMENTS - IGNORED!
[B121]
DB
LINE x LABEL 'C' IS A CONSTANT AND CAN NOT BE WRITTEN INTO.
[B122]
DB
LINE x LABEL 'C' IS IMPROPER TYPE.
[B123]
DB
unmatched "NEXT" or "REPEAT"; compilation aborted, no object code produced!
[B124]
DB
LINE x LABEL 'C' HAS LITERAL SUBSCRIPTS OUT OF RANGE.
[B125]
DB
Reserved word used as a label. example: 'ELSE=5'
[B126]
DB
'Shared data not cataloged 'x'.
[B129]
DB
Line A number of NAMED COMMON statements exceeds 5.
[B130]
DB
Line A label 'C' is not contained in the argument list for this function definition.
[B154]
DB
FOR statement with no NEXT statement.
[B188]
DB
ENTER may not be used from a SUBROUTINE.
[B189]
DB
Line A number of variables declared in NAMED COMMON statement not equal to number in program which first referenced said NAMED COMMON block.
[B203]
DB
TOO MANY INCLUDES!
[B209]
DB
LINE x FILE IS UPDATE PROTECTED.
[B210]
DB
LINE x FILE IS ACCESS PROTECTED.
[B220]
DB
LINE x 'CSYM' IS NOT A FILE NAME OR NEEDS A DATA LEVEL.
[B300]
DB
LINE x AN ATTEMPT HAS BEEN MADE TO BREACH THE SOFTWARE SECURITY FEATURE. PLEASE CONTACT YOUR DEALER FOR ASSISTANCE.
[B641]
DB
Hold file #x added;
[B999]
DB
File: x
Item: y
Compiled: z at a
Precision: b
[B1145]
DB
LINE x ILLEGAL PORT NUMBER
[B8014]
DB
LINE x DEVICE NOT ATTACHED.