where Command

The where command displays the current execution status of all processes currently logged on to system, or for selected port numbers.

Syntax

where {port.number{-port.number}} {user-ID} {(options)}

Synonym(s)

Parameter(s)

user-ID	Outputs status for a specific user-ID only. Quotation marks are optional in D3.
account	Outputs status for processes using the specified account name.
port.number{-port.number}	Outputs the status for the specified port, or a range of ports.
options	a	Displays a character next to the PIBs display to indicate the license consumption type. Possible types are: + Line consumes a user license (for D3 Windows implementations only). = Line consumes a phantom license. # Line consume both a physical and a phantom license (for D3 UNIX implementations only). For D3 Windows, a %socket call on a phantom line consumes a user license but releases the phantom license so it will show up as a +. When used with the o option, only those PIBs that are using a license are displayed. NOTE—In this mode, an asterisk is not displayed next to the port that issued the command.
	h	Suppresses the heading.
	l	Displays the status for each pushed level.
	n	No pause option suppresses the pause at the end of the page on the terminal.
	o	Displays information only for those PIBs that have the specified settings when used with the a option.
	p	Directs output to the system printer, via the spooler.
	u	Returns the user tally (under the Stat column heading).
	z	Displays where status for all ports, including inactive ports (those which are not currently logged on).

The where command displays this information:

Ln	Port number. NOTE—An asterisk indicates the port that issued the command.
PCB FID	FID of the PCB for each port.
PIB STAT	PIB status of each port.
ABS base	Beginning FID of the ABS currently being executed by each port.
Stat	Current port status:
	n	(Hexadecimal) Current TCL level. If blank, the port is at the primary level (level 1).
	d	In system debugger.
	p	Phantom process.
	t	Tape attached.
	u	When this option is used, the Stat fields contain the user tally code. Possible values for the user tally codes:
		0	Port is logged off.
		1	Port is pushed a level.
		2	Port is in process of logging on.
		3	Port is in break/end sequence.
		5	Normal setting.
		-1	Spooler controlled process.
		-2	Scheduler process.
R1 & Return stack contents	Displays the ABS mode currently executing on the port. The first entry is the current location. Subsequent entries (which are separated by spaces) are the return stack mode addresses. If the display says corrupted workspace, the most likely cause is that the workspace is not properly setup or the process is in the middle of push level or pop level.
w	Synonym of the where command.

NOTE	The where command (even with the Z option) only displays lines which have undergone some type of activity.

Example(s)

Displays the status of those ports which are currently logged into the dm user-ID.

where ’dm’

Outputs the status of port numbers 13 through 22.

where 13-22

Outputs the status of all port numbers.

where (z

where
Ln	PCB	PIB	ABS	Stat	R1 & Return stack	Contents
011	00060B	BF10	000018		sp.serialsleep:080
012	00060C	FF10	000018		au.tcl.upd:084	au.start:36C
013	00060D	BF10	000018		sp.serialsleep:080
014	00060E	BF10	000018		sp.serialsleep:080
015	00060F	BF10	000018		sp.serialsleep:080
019	000613	BF10	000018		sp.serialsleep:080
045	0469F9	F310	000018	3	au.input:000	au.get.cmnd:0D8
*056	046AA6	F310	000018	2	ws.where1:000	ws.whatwhere:354
069	0457DD	F310	000018	1	me.pause:018	me.display:598
070	04514D	F310	000018	1	me.pause:018	me.display:598
074	00064A	BF10	000018		sp.serialsleep:080
082	000652	BF10	000018		sleepsub:0F4	br.rqm:18C
128	000680	BF10	000018	P	sp.sleep:040	sp.spoolout:0F0
130	04AA25	FF10	000018	P	br.unix.bix:000
137	039A0B	BF10	000018	P	pp.sched:038