For UNIX: UNIX device name displays.
For Windows: Not Supported
The list-lines BASIC program displays communications protocol information for every port attached to the virtual machine.
Syntax
list-lines |
Synonym(s)
list.lines |
Description
The report includes these headings:
Line# |
PIB or port number. |
Baud/rt |
Baud rate of the port. |
Parity |
State of parity: none, even or odd. |
Stop |
Number of stop bits. |
Data |
Number of data bits. |
DCD |
Data carrier detect status, on or off. |
Xon/off |
State of flow control, enabled or disabled. |
TTY |
UNIX tty device attached to the port. For UNIX: The tty parameter is supported by UNIX only. |
WARNING |
If the process is not connected to the virtual machine, list-lines fails to report the terminal setting. |
Example(s)
list-lines |
|||||||
Line# |
Baud/rt |
Parity |
Stop |
Data |
DCD |
Xon/off |
TTY |
0 |
9600 |
NONE |
1 |
8 |
OFF |
enabled |
/dev/tty0 |
1 |
OFF |
|
|
|
|
|
|
2 |
9600 |
NONE |
1 |
8 |
OFF |
enabled |
/dev/tty2 |
3 |
9600 |
NONE |
1 |
8 |
OFF |
enabled |
/dev/tty3 |
4 |
9600 |
NONE |
1 |
8 |
OFF |
enabled |
/dev/tty4 |
See Also
:reset-async Command, dtr-on Command, Port Number, set-port Command, setport Command, xonoff Command