aux-off command

For mvBase users: The aux-off TCL command disables spooling previously defined by the aux-on TCL command.

The aux-off command should never be executed without a preceding aux-on command because aux-off assumes that information has been saved by aux-on.


aux [off]


off Reverses the effect of the last executed aux-on command. Auxiliary port printing is turned off, and the previous status of the p and h flags of the current TCL sp-assign status is restored.


The aux-on TCL command selects the auxiliary printer as the output device for all printer output until the aux-off command is issued.

See also

aux-on command