Starting the FSI server

When installing D3 Windows for the first or upgrading, you are asked to select between two types of installations: Typical or Custom.

Type	Description
Typical	Installs the VME and FSI Server. When installed, the D3 VME is set to start manually or automatically when Windows is restarted. Note: Typical installation installs both the VME and FSI and is recommended if using the FSI Server.
Custom	Installs either the VME Server or FSI Server. If the FSI Server is installed, the D3 FSI is set to start manually or automatically when Windows is restarted.

Depending on the type of installation (Typical or Custom), the D3 VME and/or D3 FSI is either started automatically or manually when Windows is restarted.

For Typical and Custom installations, follow these instructions to start the FSI Server.

Procedure

Go to Windows Services.
The Services dialog box displays.
Do one of the following:
- For Typical installation (recommended):
  
  Select D3 VME, then click the Start Service icon. Both the VME and FSI Servers are now started.
- For Custom installation:
  1. Select D3 FSI, then click Start Service icon.
    
    This starts the D3 FSI Server.
  2. Select D3 VME, then click the Start Service icon.
    
    This starts the D3 VME Server.
(Optional) Change Startup Type options from the Service dialog box as displayed below. See D3 Windows Installation Guide.