Connecting to host systemsBlueZone 6530Creating BlueZone 6530 Display connections

Creating BlueZone 6530 Display connections

Prior to establishing a host system connection, you must define a host connection.

  1. Click Start → All Programs → BlueZone 7.1 → BlueZone 6530.

    The first time that you create a BlueZone 6530 Display session, the Define New Connection window opens.

    To open this window on subsequent connections, click Session → Configure, and then click New or Edit.

  2. In the Connection tab, complete the following fields:
    Telnet Connection
    • Connection Name: A unique name used to identify this collection of Connection settings.
    • Host Address: Specifies the computer name (in Internet format, known as DNS Name) or the IP address in either IPv4 or IPv6 format, of the host system.
    • TCP Port: Specifies the TCP port number. The default is 23.
    • Backup Host: Specifies the backup host to which BlueZone connects if the primary host is not available. Backup hosts are selected from the Connection List.
  3. In the Emulation tab, complete the following fields:
    Emulation Options
    • Terminal: : Select the terminal type that you want to emulate from the menu. For BlueZone 6530, TANDEM is the only available terminal type.
    • Terminal ID: The Terminal ID automatically changes with the chosen Terminal setting above; however, you can override this value with the setting of your choice.
    Default Screen Size
    • Rows: Sets the number of viewable rows used by the host.
    • Columns: Sets the number of viewable columns used by the host.
  4. In the Firewall tab, you can configure the firewall and proxy server sign on systems. Complete the following fields:
    Firewall Options
    • Use Firewall/Proxy Server: Select to enable this feature.

    • Use Browser Settings: Select to use the firewall settings in your default web browser.

    • Firewall Type: Select the firewall type from the menu:
      • SOCKS4 Proxy
      • SOCKS4A Proxy
      • SOCKS5 Proxy
      • NVT Proxy or Firewall
      • HTTP Tunnelling Proxy
    • Firewall Address: Type the IP address of the firewall.
    • Port: Type the port number used by the firewall.
    • Timeout: Type the appropriate time out value.
    • User Name: Type the user name.
    • Password: Type the password.
    • Domain: Type the domain name.
      Note: If you selected NVT Proxy or Firewall, then you must provide the following prompts:
      • Host Name Prompt: Type the firewall prompt, or a unique portion of the prompt, of the host name that BlueZone is expecting. For example, Enter host name. If this prompt is detected, the Host Address from the Connections tab is sent.
      • User Name Prompt: Type the firewall prompt, or a unique portion of the prompt, of the user name that the firewall is expecting. For example, Enter user name. If this prompt is detected, the User Name Prompt field is sent.
      • Password Prompt: Type the firewall prompt, or a unique portion of the prompt, of the password that the firewall is expecting. For example, Enter password. If this prompt is detected, the Password Prompt field is sent.
      • Connected Prompt: Type the firewall prompt, or a unique portion of the prompt, of the connection message. For example, Connected or Connected to host. If this prompt is detected, the firewall connection is considered to be complete and the Telnet negotiation begins.
  5. In the Security tab, configure the SSL, TLS, or SSH options. BlueZone 6530 can be preconfigured for distribution with encryption configured and enabled eliminating the need for any end user intervention in the installation or configuration process.
    Note: The available Security Options change depending on the type of encryption selected. This document covers all possible settings
    Complete the following fields:
    Security Options
    • Security Type: If you want to encrypt your session, select one of the following encryption methods from the drop-down list box. The method is dictated by the secure Telnet host that you are connecting to.
      • None: Indicates that no encryption is being used.
      • Implicit TLS: Negotiates a secure connection to the host first, then negotiates the Telnet connection.
      • Explicit TLS: Encryption is negotiated during the Telnet negotiation.
      • SSH
    • Minimum TLS Version: Specifies the minimum allowable TLS protocol version. A higher version may be negotiated if the server supports it:
      • SSL v3: Allows SSLv3 to be used. SSLv3 has numerous vulnerabilities and is no longer considered secure. This setting is NOT RECOMMENDED.
      • TLS v1.0 (Default): Specifies that at least TLS version 1.0 is used. This is the default value.
      • TLS v1.1: Specifies that at least TLS version 1.1 is used.
      • TLS v1.2: Specifies that at least TLS version 1.2 is used.
    • Preferred Cipher Suite: Specifies a specific SSL/TLS or SSH cipher suite (encryption algorithm) to use. To allow the client and server to negotiate the cipher suite, select Strong only.
      Note: The cipher suite choices will change depending on if you are using SSL/TLS or SSH.
      Strong only is not available in SSH.
    • Invalid Certificates: Specifies how to handle an invalid server certificate.
      • Always Reject: Specifies that an invalid server certificate must always be rejected.
      • Ask Before Accepting: Specifies that the user must be asked whether to accept an invalid server certificate.
      • Always Accept: (Default) Specifies that an invalid server certificate must always be accepted.
    • Check for Certificate Revocation: Specifies how to perform revocation checking on the server certificate chain at connect time, which will result in a connection failure if a certificate has been revoked, if the revocation server cannot be contacted, or if revocation information is not listed in the certificate.
      • Do Not Check: Performs no certificate revocation checking.
      • Server Certificate Only: Performs revocation checking on the end server certificate only.
      • Server and Chain Certificates: Performs revocation checking on the end server certificate and the intermediate certificates in the chain.
      • Server, Chain, and Root Certificates: Performs revocation checking on the end server certificate, the intermediate certificates in the chain, and the root certificate.
    • Alternate Principal Name: Type a valid address in this field to use to validate the server certificate.

      When a host site's server certificate's Common Name (CN) or AltSubjectName does not match the address used to connect to the host, a certificate error occurs, stating that the host address does not match the common name. If it is not possible to connect to the host address listed in the certificate, the address from the certificate can be typed into the Alternate Principal Name field. This address, rather than the host connection address, is used to validate the server certificate.

    • Remote Command: Remote Command will take the place of Alternate Principal Name when SSH is selected. You can use this text box to send remote commands to your SSH connected host. This feature is popular with Linux hosts.
  6. In the Certificate tab, complete the following fields:
    Client Certificate
    These parameters specify the type of client certificate to use if any.
    • No Client Certificate: Specifies that a client certificate must not be presented.
    • Client Certificate in Certificate Store: Specifies that a client certificate must be presented that is located in the certificate store.
      • Common Name: Specifies the Common Name (CN) of the certificate to be presented.
        • View: Click to view the certificate.
        • Browse: Click to display a list of certificates in the certificate store.
  7. In the Kerberos tab, you can configure the optional Kerberos Authentication Protocol component. If the Kerberos tab is not available, the Kerberos component was not installed. Refer to the BlueZone Desktop Administrator's Guide in Chapter 2: Installing BlueZone - Optional installation features - Enabling Kerberos for information about installing the Kerberos Authentication feature.
    Complete the following fields:
    Kerberos options
    • Enable Kerberos Authentication: To enable Kerberos Authentication for this session, place a check in this check box.
    • Use Windows Credentials: If enabled, your Windows credentials (User Name and Domain) are used in lieu of Principal and Realm. Your User Name is used as the Principal name and your Domain name is used as the Realm name.
    • Forward Credentials: If enabled, your credentials are forwarded to the remote session. The credentials are passed as a Kerberos message which includes, among other things, the forwarded Kerberos ticket and a session key associated with the ticket.
    • Principal: If you are not using your Windows credentials, type your Principal name here.
    • Realm: If you are not using your Windows credentials, type the Realm name here. The Realm name must be typed entirely in uppercase.
    • Target: Type the name of the Kerberos database.
    • Manage Tickets: Click to manage Kerberos tickets. The Kerberos Ticket Manager opens.
  8. The Tunneling tab will only appear when SSH is selected on the Security tab.

    Complete the following fields:

    Tunneling Options
    • Enable X11 forwarding: Select to enable X11 forwarding
    • Allow Remote Connections: If enabled, you are allowing remote IP addresses to connect to the local listening port used in tunneling.
    • Add, Edit or Delete: Used to add, edit or delete port forwarding rules.
    • Add: When adding a rule, you have to choose either Local Port or Remote Port, then enter the port number you want to forward. Then you have to add the host name in the Name field with the port number on that host.
    • Edit: Allows you edit an existing rule.
    • Delete: Allows you delete an existing rule.
  9. Click OK.
Note: If you enable the Direct/Modem feature in the global.ini file, you can change the connection type from Telnet to Direct or Modem using the Connection Type list that appears in the Connection tab. If you select either Direct or Modem connections, you will have the option to select your desired Baud Rate, Data Bits, Parity, Stop Bits, Flow Control, and Phone Number (modem only). For more information on enabling the Direct/Modem feature, refer to the Rocket BlueZone Desktop Adminitrator's Guide.
Parent topic: BlueZone 6530