1.

Launch a BlueZone T27 display session from Session Manager or from the desktop icon. A dialog opens prompting you for a profile name.

2.

In the File name field, type in the desired name and click Save. BlueZone automatically assigns the correct file extension for the session type.

3.

A message box opens asking you if you want to create the file. Click Yes. When the session launches, you are presented with the BlueZone T27 display.

4.

On the BlueZone menu bar, click Session → Configure → Configure. The T27 Terminal Configuration Settings dialog opens.

5.

Click New Screen. The New Screen tab appears in the display as shown. You can name the screen any name you want by editing the name in the Screen connection name field. Figure 4: T27 Terminal Configuration Settings dialog

6.

Click Configure Connections. The following message appears:

7.

Click Yes. The T27 Connection Configuration dialog opens.

8.

Double-click MYHOST. The Edit Virtual Destination dialog opens.

9.

Type your host's IP address and IP Port Id. The IP address can be a numeric IP Address or a DNS Name.

10.

Click OK. You return to the T27 Connection Configuration dialog.

11.

Click Save and Close. You return to the T27 Terminal Configuration Settings dialog.

12.

From the Connection Route drop-down menu, select an available route. If you followed the previous steps, ROUTE1 is available.

13.

Click Save and Close.

14.

Click OK on the Session Configuration dialog.

15.

From the BlueZone menu bar, click Session → Connect. You are now connected to your host. Connected appears on the BlueZone status bar.