BlueZone displays the available host connection options. Select the appropriate link for additional configuration information:
Note
BlueZone defaults to the connection type that was chosen during installation.
Connection Type
|
• |
Microsoft SNA Server: Select to connect to the host system using an NT Server running the Microsoft SNA Server software.
Note The Microsoft SNA Client must be installed on the PC in which BlueZone is running before the connection can be made.
|
|
• |
Renex Async Protocol: Select to connect to the host system using a Renex TMS or RPad Communications Controller.
|
|
• |
TN3270E/TN3270E: Select to connect to the host system via TCP/IP using the TN3270/TN3270E protocol.
|
|
• |
IBM Communications Server: Select to connect to the host system using an NT Server running the IBM Communications Server software.
Note The IBM Communications Server Client must be installed on the PC in which BlueZone is running before the connection can be
made.
|
|
• |
IntranetWare for SAA: Select to connect to the host system using an NT Server running the IntranetWare for SAA software. NOTE: The IntranetWare
for SAA Client must be installed on the PC in which BlueZone is running before the connection can be made.
|
Use Custom LUA-RUI Compliant Dynamic Link Library
Selects a custom connection type for BlueZone to use when connecting to the host system. The Dynamic Link Library (DLL) specified
must be LUA (Logical Unit Addressing)-RUI (Request Unit Interface) compliant.
|
• |
Browse: Allows you to enter the path and file name of the Dynamic Link Library DLL
|
|
• |
LU Name: Type the LU /Pool Name to use when using the Custom Library Link above.
|
Configure
Click to configure the highlighted connection.