The BlueZone Setup Program uses values in the SETUP.INI file to set parameters during installation. By default, the Registry Mode is not enabled. To enable Registry Mode, you have to edit the SETUP.INI file and change the ProfileMode= setting to No.
[BZSetup]
ProfileMode=No
CAUTION! You
can not run the BlueZone SETUP.EXE program from the BlueZone CD-ROM if
you want to install BlueZone in Registry Mode. You
must copy the BlueZone installation files to your hard drive so that you
can modify the SETUP.INI file. The
procedure is outlined below.
Copy the entire BlueZone Desktop folder from the BlueZone CD-ROM to a convenient location on your workstation's hard drive.
Edit the SETUP.INI file with Notepad.
Locate ProfileMode=Yes setting in the [BZSetup] section and change to ProfileMode=No.
Save the file and exit Notepad.
Install BlueZone by double clicking the SETUP.EXE program located on your hard drive in the same folder where the modified SETUP.INI file is located.
BlueZone will now be installed in Registry Mode.