Using the Display Interface
To change what is displayed on the StatusBar, click View:Properties on the BlueZone MenuBar and choose the StatusBar tab; or, position the mouse pointer over the StatusBar and double-click with the left mouse button.
To remove any of the configured options from the StatusBar, disable it by removing the check in the check box.
Settings ----
This group is used for overall StatusBar options.
Show StatusBar: Determines whether or not the StatusBar is displayed.
StatusBar Size: Use the drop down listbox to select the desired StatusBar size. Your choices are:
Small - 16 x 16 Pixels
Medium - 24 x 24 Pixels (default setting)
Large - 32 x 32 Pixels
Extra Large - 48 x 48 Pixels
Customize the StatusBar ----
This group is used to add or remove StatusBar indicators. The indicators are listed starting with the left column, then going down the right column of the dialog display. Un-checking the box next to the indicator, will remove it from the StatusBar.
Session Identifier: S1, S2, S3, etc.
Host Keyboard Lock Status: Used to show / hide the Keyboard Lock Status on the StatusBar.
Possible status values are:
Ready - Keyboard is available for input.
X Wait - Keyboard is locked. Time is required for the system to perform a function.
X-f - The requested function in not available.
X Num - A non-numeric entry was made in a numeric field
X Too Much - The operator attempted to enter too much data into a field.
X Not Here - Protected field... cannot type when the cursor is at this position.
X What? - The last input was not accepted
X Prog x - A program error was detected in the data received by the host; “x” describes the probable cause.
X Comm x - An attempt was made to access host communications while a communications error exists; “x” describes the probable cause.
X Mach x - Host machine check; “x” describes the probable cause.
X System - The program has disabled the keyboard following an entry.
Session Status Indicator/ Host IP Address / Session Description: Displays the current Session Status, the IP address of the host, or the Session Description.
Possible values of the Status Indicators are:
Licensing - Displays while BlueZone is checking for available licenses.
Initializing - Displays at startup.
Connecting - Displays while attempting to establish a connection.
Connected - Displays when the session is connected to the host.
Disconnecting - Displays while disconnecting form the host.
Disconnected - Displays when the session is disconnected.
Driver Designator: Always displays ICL
7561 / IRCIS Mode Indicator: Indicates whether in 7561 or IRCIS Mode.
System Time and Date: Displays the current date and time in military format.
Keyboard Insert Mode Indicator: Indicates whether or not the keyboard is in Insert mode. If the box is blank, Insert mode is off. If a green carat is displayed, Insert Mode is turned on.
Keyboard NumLock Indicator: Displays the status of the Num Lock key. If NUM is displayed on the BlueZone StatusBar with full intensity, Num Lock is on, if NUM is grayed out, then Num Lock is off.
Keyboard Lock Status Bitmaps: Indicates whether or not the keyboard lock is enabled. If the keyboard lock is on, a blue up arrow will be displayed in this box.
Keyboard Restore Count: If checked, the number of keyboard restores sent from the host system will be displayed on the StatusBar. This option is useful when developing high-speed scripts using the BlueZone Scripting Host.
Keyboard CapsLock Indicator: Indicates whether or not the keyboard lock is enabled. If the keyboard lock is on, a blue up arrow will be displayed in this box.
Active LU Bound Time: Displays the total time of the current connection.
Cursor Row and Column Indicator: Displays the current cursor position as Row, Column.
Related Topics: